Swimming pool leak sealer

Easy-to-apply single-component sealant that performs its leak plugging action during the operation of the system, without the need to locate the source of the water loss and without the need to empty the pool.

Piscisell is completely harmless to the materials commonly used in swimming pools, as it does not attack synthetic compounds such as rubbers or rubbers.

Leaks repaired with Piscisell are totally rigid and resistant to temperature, generating highly durable repairs.

HOW TO USE:

Piscisell is a ready-to-use product, so it is used directly.
For best results, it is recommended to follow the following procedure:
1. Stop the pool’s filtration system and remove any non-fixed element, such as pool cleaners or similar.
2. Place the system filter in the recirculation position. (If the installation does not have a selector key, disconnect the filter by bypassing).
3. Then vigorously shake Piscisell and add the required amount by the skimmers or, better yet, directly through the recirculating water booster pump. This step is important, since the more the product is agitated and the better it is distributed throughout the pool, the more guarantees of success the repair will be.
4. Keep the pool in recirculation mode for 2-3 days to ensure that the product can infiltrate all the cracks.
5. After this time, stop the recirculation and keep the pool static to check the effectiveness of the treatment.
6. Finally, adjust the pH to pH less, adjust the chlorine content and put the installation into service.
The dosage of Piscisell varies depending on the number of cracks in the system, its diameter and the loss of water it has. In general, a dosage of 2 to 5 Lts/100 m3 is sufficient to perform an effective seal in systems with a loss of no more than 200 Lts/day.