Water leaks in swimming pools are not just a nuisance; they represent asignificant economic loss due to wasted water, energy for heating, and chemicals. It can be very frustrating to see the pool water level mysteriously drop. Additionally, an undetected leak can cause serious damage to your pool’s structure and equipment. Don’t worry! At Neoquim, we want you to enjoy your pool without surprises. That is why we bring you a simple and effective guide to detect any leak and discover the most practical and effective solutions, including our professional help!
How to Know if Your Pool Has a Leak? The Key Clues!
The first step is to know if there really is a leak or if the water is just going down due to normal evaporation. If the water level of your pool drops more than usual, especially when you are not using it or when there is little wind, it is a warning sign. Here we tell you how to confirm it:
The Bucket Test: Foolproof!
It is very simple and will give you the answer.
- How to do it? Take a bucket, fill it with water, and place it on a step of the pool, so that the water level in the bucket matches that of the pool. You can mark both levels with a marker.
- What does it mean? Leave it for 24-48 hours. If the pool’s water level drops more than the bucket’s, you have a leak! If they drop equally, it is most likely evaporation.
Visual Inspection: Look for Evidence!
If the bucket test confirms the leak, it is time to investigate thoroughly.
- Inside the pool: Check the walls and the floor. Are there cracks? Any loose tiles or damaged joints? Pay attention to the corners and the line where the water ends.
- The “fixtures”: Look closely at the skimmers (the mouths that collect dirt), the nozzles where water comes out, the bottom drain, and the lights. The joints of these pieces are usually weak points.
- Around the pool: Observe the nearby ground. If there are areas that are always wet, muddy, or the ground sinks, it could be a leak in the underground pipes.
The Filtration System: Your Pool’s Heart!
The pump, the filter, and the pipes can also be the culprits.
- In the pump house: Check the pump, the filter, the valves, and all the joints. Are there drips or puddles?
- The pressure: If the filter pressure gauge shows low or fluctuating pressure, there could be a problem in the circuit.
Advanced Technology: For Hidden Leaks!
If you don’t find the leak at first sight, don’t get discouraged. Professionals use special tools like underwater cameras or devices that detect the sound of leaks. Sometimes, they even use gases that ‘escape’ through the leak to locate it accurately!
How to Repair a Leak in Your Pool? Solutions Within Your Reach!
Once you know where the problem is, it’s time to take action. Depending on the leak, there are several ways to repair it:
- Cracks in the Liner: If you see small fissures in the walls or bottom, they are usually repaired with a special pool sealant. They are highly water- and chlorine-resistant products, which guarantee a long-lasting repair.
- Damaged Joints or Tiles: If the leaks are coming from the joints between the tiles, it is best to replace or seal them again with a suitable material that is compatible with your pool liner.
- Pipe Problems: If the leak is in the pipes or filtration system, it is safest to call a professional. They have the equipment and experience to repair or replace damaged pipes without causing further problems.
For those small leaks that are hard to see, we have the solution:PISCISELL. Piscisell by Neoquim is the innovative liquid sealant that allows you to repair microleaks in the pool quickly, easily, and without emptying it. Thanks to its unique formula, Piscisell locates and seals those annoying cracks up to 0.2 mm.How does it work? It is a liquid that is poured directly into your pool water:
-
- Stir and add through the skimmers or directly through the water recirculation pump.
- Its particles seek the leak and, upon contact with it, automatically seal it.
That’s how easy it is!
Benefits:
- Goodbye to leaks: Effectively seals small cracks and porosities.
- Hassle-free: You don’t need to empty the pool or locate the leak.
- Easy to use: Just pour the product and let the recirculation system do the work.
- Totally safe: Harmless to your pool materials and long-lasting.
Take back control of your pool and save water and money! A water leak doesn’t have to ruin your enjoyment of your pool. With these tips and the right solutions, you can keep it in perfect condition, saving water and money. Have you noticed your pool losing water, or do you just want to prevent future problems? Don’t wait any longer!
Other similar articles:5 Solutions to humidity problemsTips for starting up your pool
Neoquimito